S1 Safety shoes e.s. Brooklyn low
S1 Safety sandals e.s. Apiro
OVERVIEW OF PROTECTION CLASSES
- EN ISO 20345:2011 S1P with 100 % metal-free composite toe cap acc. to EN ISO 22568-2:2019 - extra light, reinforced with carbon fibres and puncture-resistant sole made of ceramically treated textile fibres
- Lightweight, comfortable and breathable
- Upper material made of microfibre with perforation, in an almost seamless finish
- Free of metal and leather
- Strap made of breathable mesh material
- Pleasantly padded strap and collar
- Textile inner lining with microfibre heel reinforcement
- Dirt cannot penetrate thanks to the closed tongue design
- Removable, full-surface anatomically shaped insole
- ESD features according to DIN EN 61340 with a leak resistance between > 0.1 Megaohm (1.0 x 10⁵ Ohm) up to < 100 Megaohm (1.0 x 108 Ohm)
- Also ideal for insole wearers
- The anti-slip PUR/TPU two-layer sole conforms to SRC, anti-static, fuel-resistant and heat-resistant up to approx. 130 °C
ONE MODEL
ONE SAFETY CLASS
THREE DIFFERENT SHOE TYPES 'MADE IN GERMANY'
Be it ankle-high safety boots, comfortable safety shoes or airy safety sandals: The e.s. Banco that is made on the Strauss CI-Factory is the perfect S1P allrounder. The right shoes for whatever requirements - lightweight, safe and comfortable!
ESD
Workplaces that need to be protected from electrostatic discharges are called Electrostatic Protected Area or ESD workplaces. Thanks to anti-static equipment, e.g. anti-static work clothing and ESD safety shoes, electrostatic charging usually caused by friction is prevented in these areas. In line with the current ESD norms, the maximum electrostatic charges are stated for ESD protected areas. This serves to protect against electrostatic discharges that could damage or destroy sensitive electronic parts. Work and protection shoes with ESD features must satisfy the requirements of the DIN EN 61340 standard with a bleeder resistance of between > 0.1 mega ohms (1.0 x 105 Ohm) and < 100 mega ohms (1.0x 108 Ohm). EN 1149-5:2008 in conjunction with EN 1149-3:2004 governs the properties of protective clothing with electrostatic properties.
Made in Germany
Made by Strauss
Exclusively manufactured in our CI Factory.
This is where the shoes of the future are created.
Price
Available colours
Available sizes
EN standard
Fastener system
Foot width
Functional clothing
Heatresistant up to
Highest slip resistance
Inner material
Penetration protection
Shape
Sole material
Special features
Suitable for insole wearers
Toe cap
Upper material
Weight of size 42
Wet/weatherproof
more sole requirements
protection classes
Extras
ESD
Workplaces that need to be protected from electrostatic discharges are called Electrostatic Protected Area or ESD workplaces. Thanks to anti-static equipment, e.g. anti-static work clothing and ESD safety shoes, electrostatic charging usually caused by friction is prevented in these areas. In line with the current ESD norms, the maximum electrostatic charges are stated for ESD protected areas. This serves to protect against electrostatic discharges that could damage or destroy sensitive electronic parts. Work and protection shoes with ESD features must satisfy the requirements of the DIN EN 61340 standard with a bleeder resistance of between > 0.1 mega ohms (1.0 x 105 Ohm) and < 100 mega ohms (1.0x 108 Ohm). EN 1149-5:2008 in conjunction with EN 1149-3:2004 governs the properties of protective clothing with electrostatic properties.
Made in Germany
Made by Strauss
Exclusively manufactured in our CI Factory.
This is where the shoes of the future are created.
dryplexx® waterproof breathable
The new generation of WEATHERPROOF
Permanently waterproof, highly breathable, perfect climate comfort. Based on the "sock principle", the dryplexx® functional membrane is completely worked into the shoe, providing professional, reliable and strong weather protection - guaranteed!
- Permanently waterproof
- Highly breathable
- Perfect climate comfort
Outer fabric Weather protection
Mid layer Removal of the moisture
Membrane waterproof, windproof, breathable
Functional layer Transfer of the moisture
Inner lining Moisture absorption
ESD
Workplaces that need to be protected from electrostatic discharges are called Electrostatic Protected Area or ESD workplaces. Thanks to anti-static equipment, e.g. anti-static work clothing and ESD safety shoes, electrostatic charging usually caused by friction is prevented in these areas. In line with the current ESD norms, the maximum electrostatic charges are stated for ESD protected areas. This serves to protect against electrostatic discharges that could damage or destroy sensitive electronic parts. Work and protection shoes with ESD features must satisfy the requirements of the DIN EN 61340 standard with a bleeder resistance of between > 0.1 mega ohms (1.0 x 105 Ohm) and < 100 mega ohms (1.0x 108 Ohm). EN 1149-5:2008 in conjunction with EN 1149-3:2004 governs the properties of protective clothing with electrostatic properties.
